Listening To The Tuner - Eclipse CD8061 Owner's Manual

When a CD is already loaded, press the [SOURCE] button
repeatedly to switch to the CD mode.

Listening to the tuner

1 .
Press and hold the [SOURCE] button until the
mode switches to the tuner mode.
This will turn the tuner on.
To turn the tuner off, press the [SOURCE] button either
shorter to select another mode or longer to turn the
power off.
2 .
Tap the [ BND ] button to switch to the
desired FM or AM bands.
[BND ] button
[BND ] button: Switch the AM band.
It is also possible to change the numbers of FM and AM
bands in a certain combination of them (See Page 56).
3 .
Press the [ TU ] button to tune to a station.
A tap on either the [
second will enable manual station tuning. Hold one
button down for more than two seconds to start the
automatic station search.
[TU ] button: Starts searching toward higher
[TU ] button: Starts searching toward lower
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the
section "Manually setting stations into memory" on page
48.)
Switch the FM band.
Pressing the button repeatedly
switches the FM band in the order of
FM2 ... .
FM1
Pressing the button repeatedly
switches the AM band in the order of
AM2 ... .
AM1
TU ] button for less than one
frequencies.
frequencies.
Basic operation
25