Seat Height Adjustment - Sterling Little Star Owner's Manual

Safety warning and user guidance
Transportation
When transporting the scooter remove seat
and lower the tiller. The battery should also
be removed to make the parts lighter.
Always stow your scooter in the luggage
compartment of your vehicle.
Always ensure your scooter or scooter
parts are securely anchored when being
transported.
Do not sit on your scooter whilst it is being
transported in or on another vehicle.
Do not attempt to carry passengers on
your scooter.
Do not attempt to tow another vehicle.

Seat Height Adjustment

The seat post is height-adjustable by firstly
unscrewing the seat locking bolt (Photo 8).
Fold down the backrest and lift the seat off.
Remove the seat height adjustment pin.
Move the pin to the desired position and
re-insert (Photo 9).
Replace seat and check that all parts are
secure. Tighten the seat locking bolt by
turning it clockwise.
Use of mobile phones
Mobile telephones or two way
radio devices must not be used
while operating the vehicle.
Use of mobile phones
or two way radios can
cause excessively strong
electromagnetic fields. This
may interfere with the vehicle's
electronic systems.
If mobile phones or mobile
radios are required to be used,
the vehicle must be brought
to a halt and the power turned
off before any such device is
switched on or used.
If you are in any doubt
about your ability to
drive the scooter due to
any medical condition or
treatment, then consult your
doctor.
Photo 8
Photo 9
Seat Pin
Photo 6
16 Iss 2