Configuring Wpa2 With Radius - NETGEAR ProSafe WNDAP350 Reference Manual

ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual

Configuring WPA2 with RADIUS

Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
Figure 2-19 Configure WPA2 with RADIUS
To configure WPA2 with RADIUS:
1. Under the Configuration tab, select Security on the main menu, select Advanced from the
left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen
displays.
2. Enter the RADIUS settings as shown in
page 2-29.
3. Click Apply to save your RADIUS settings.
4. Under the Configuration tab, select Security from the main menu, and then select either
Security Profile Settings for 802.11b/bg/ng or 802.11a/n.a The screen for the Profile Settings
you selected displays. When the Security Profile screen displays, check the check bb ox of the
Security Profile you want to modify and click Edit.
Basic Installation and Configuration
""Configuring the RADIUS Server Settings" on
v2.0, April 2013
2-37