Default Settings And Technical Specifications; Factory Default Settings - NETGEAR ProSafe WNDAP350 Reference Manual
Prosafe dual band wireless n access point
Hide thumbs
Also See for ProSafe WNDAP350:
- User manual (136 pages) ,
- Reference manual (104 pages) ,
- Product data (2 pages)
Table of Contents
Advertisement
Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
Dual Band Wireless N Access Point WNDAP350 .
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table A-1
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Connection
Static IP Address
Ethernet MAC Address
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
Gateway Address
DHCP Server
Default Settings and Technical Specifications
Description
192.168.0.237
admin
password
192.168.0.210
See bottom label.
10/100/1000
192.168.1.1
255.255.255.0
0.0.0.0
Disabled
v2.0, April 2013
Appendix A
A-1
Advertisement
Table of Contents
