Basic Installation And Configuration - NETGEAR ProSafe WNDAP350 Reference Manual

This chapter describes how to set up your ProSafe Dual Band Wireless N Access Point
WNDAP350 for wireless connectivity to your LAN. This basic configuration will enable
computers with 802.11b/g/n or 802.11a/n wireless adapters to do such things as connect to the
Internet, or access printers and files on your LAN.
Note: Indoors, computers can connect over 802.11b/bg/ng or 802.11a/na wireless
networks at ranges of several hundred feet or more. This distance can allow for
others outside your area to access your network. It is important to take appropriate
steps to secure your network from unauthorized access. The WNDAP350 wirelss
access point provides highly effective security features which are covered in detail
in "Understanding Security Profiles" on page
appropriate to your needs.
This chapter contains the following sections:
1. "Wireless Equipment Placement and Range Guidelines
2. "Understanding WNDAP350 Wireless Security Options
3. "Installing the WNDAP350 wirelss access point
4. "Logging In Using the Default IP Address
5. "Setting Basic IP Options
6. "Wireless Settings
7. "Setting Up and Testing Basic Wireless Connectivity
8. "Understanding Security Profiles
9. "SSID and WEP/WPA Settings Setup Form
10. "Configuring the RADIUS Server Settings
11. "Setting up a Security Profile
12. "Configuring WEP
13. "Configuring WPA with RADIUS

Basic Installation and Configuration

v2.0, April 2013
Chapter 2
2-23. Deploy the security features
2-1