Troubleshooting - iHome iD48 User Manual

Troubleshooting

Unit doesn't respond (no power)
Make sure the internal battery is charged OR AC adaptor is connected to unit
and is plugged into a working outlet (plug another device into the same outlet
to confirm outlet is working, and make sure any associated power switch is
ON). Make sure the Remote Switch on the bottom of the unit is in the ON
position.
iPhone/iPod/iPad does not charge
The iD48 will not charge devices while operating on the internal battery.
Make sure AC adaptor is connected to unit and is plugged into a working
outlet (plug another device into the same outlet to confirm outlet is working,
and make sure any associated power switch is ON).
Make sure you have the latest firmware for your iPad, iPhone or iPod (update
via iTunes if needed). Make sure your device is working properly. Check your
iPhone or iPod manual for details.
Resetting the unit
If the unit does not respond properly or appears to be "frozen", you may wish
to try resetting it. To do so, press point of a pin or paperclip firmly into the
Reset pin hole on the bottom of the unit to reset the unit.
For further information and to see the latest instructions, visit
www.ihomeaudio.com
10