Bedside speaker system
for amazon echo devices (6 pages)
Summary of Contents for iHome ibt35
Page 1
Waterproof Rechargeable Bluetooth Stereo Speaker System with speakerphone CHARGE BEFORE instruction manual...
Page 2
Using the IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION For proper waterproof operation, make sure the waterproof cover on the left side of the unit is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place.
Page 3
Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
Table of Contents Included / Meet Your iBT35..................... 1-2 Charging the iBT35/ECO Battery Mode ................3 Turning the Unit ON and OFF.....................4 Using Bluetooth: Pairing Your Device ..................5 Playing Audio Via Bluetooth....................6 Using the Speakerphone feature ..................7 Playing Audio Via Aux line-in ....................7 FCC information.......................8...
Page 5
Included 1. iBT35 Speaker 2. USB charging cable 3. Bottle opener/carabiner clip To remove carabiner clip: 1. Hold clip sideways to unit. 2. Press clip hinge post inwards and slide strap loop off of hinge post.
Meet Your iBT35 Volume Down Button Volume Up Button Power On/Off Button Play/Pause/Pairing Button Reverse/End Call Button Forward/Answer Call Button Top view Charging LED Indicator Power/Bluetooth Waterproof Door Cover Status Indicator ECO Battery Mode On/Off Switch Speakerphone Mic Reset...
Using the Charging the iBT35 For first time use, make sure to fully charge the internal battery for about 8 hours. iHome iBT35 USB port Computer connected to working outlet To charge the unit, connect the included USB charging cable...
Using the Turning the Unit ON and OFF 1. Press the Power Button located on top of the unit to turn the unit ON. The green/red battery status and blue Bluetooth status LED indicators on the front of the unit will light and ascending tones will sound.
Button (located on top of the unit) for 2 seconds. 2 tones will sound and the indicator light on front of the unit will flash blue while the unit attempts to pair. “iHome iBT35” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT35”...
Using the Pairing with a Different Device When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 33 feet). To pair with a different device, please follow step 3 on page 5.
Using the Using the Speakerphone feature NOTE: The unit must be powered on to receive a call. A Bluetooth phone must be linked. When a call is received, playing music is muted to hear the ring tone. Press the...
FCC/IC Information FCC ID:EMOIBT35 IC:986B-IBT35 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:...
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Page 14
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free...
• Check that all connections are correct and properly plugged in. • For internal battery operation, make sure the unit is fully charged. • Make sure your device is properly paired with the iBT35. • Make sure the Power is ON.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.