Troubleshooting - iHome Kineta K3 Instruction Manual

Unit doesn't respond (no power)
• Check that unit is fully charged OR connected to AC power.
• Make sure your device is properly paired with the K3.
• Make sure the Power is ON.
• If the unit seems "frozen" or locked up, insert the end of a paperclip or similar into the Reset port under
the jack cover on the left of the unit to reset unit.
Resetting Bluetooth
If Bluetooth function is not operating properly, you may wish to reset Bluetooth. To do so, press and hold
the Bluetooth Button for 10 seconds. You will hear a long high tone. You will then need to re-pair any
previously paired devices.
Trouble pairing device/computer with K3
Bluetooth implementation varies depending on your device's hardware and operating system. Please
see our website for updates on pairing.
• Make sure you have the latest firmware for your device.
• Make sure your device is working properly. Check your device's manual for details on Bluetooth
pairing and linking.
• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth
device if the device is still within range (approx.30 feet). To pair with a different device you must turn
off Bluetooth capability on the already paired device, or take it out of range.
For further information and to see the latest instructions, visit www.ihome.com/support

Troubleshooting

18
P19