Set Speakers And Test Speaker Output; Detecting Speakers Automatically - Panasonic HDMI SA-XR700 Operating Instructions Manual

Step

Set speakers and test speaker output

3
The unit checks each speaker's connection status and make speaker settings automatically.
CH
VOLUME
0
DIRECT
TUNING
DISC -/- -
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT MANUAL SKIP
ENTER
SUB MENU RETURN
SUBWOOFER TV
OFF
DIMMER
LEVEL EFFECT VOL
NEO : 6 TV/AV
SFC
AUTO
MUSIC MOVIE TEST MUTING
"WARNING " messages may appear on the display depending on detection results.
Note
• Automatic detection does not work well depending on speakers and cables.
Make speaker settings manually in such cases (á page 33).
• These settings remain effective after the unit goes off.
• The unit considers seven speakers and one subwoofer are connected to the unit (keeps factory settings) unless you perform these steps.
• Perform the above steps when you connect a new speaker.
10
RQT8743
" "
INPUT SELECTOR
BI-AMP
ADVANCED DUAL AMP
-MENU/-SETUP ENTER
RETURN
- MENU/ - SETUP
ENTER
RETURN

Detecting speakers automatically

1
To turn the unit on
Press
8
To check the speaker
2
presence
SPEAKERS
A B
Press
AUTO DETECTOR
Automatic speaker detection starts.
(e.g.)
The right surround back speaker was detected, but the unit did not detect the left surround back
speaker. Use the terminal for the left speaker when you connect one surround back speaker only
(á page 9).
The unit did not detect left and right surround speakers.
Connect surround speakers as well when you connect surround back speakers to the unit.
The unit did not detect one of the two surround speakers.
Check speaker connections.
SPEAKERS
A B
AUTO DETECTOR
SURROUND
AUTO SPEAKER SETUP
SURROUND SPEAKERS TUNE
AUX
AUTO DETECTOR
SURROUND SPEAKERS TUNE
S VIDEO VIDEO
AUTO DETECTOR
simultaneously.
The unit checks the center speaker, surround
speakers, surround
subwoofer in that order.
(The connection status for front speakers is always
present.)
The display shows the number of detected speakers
(excluding the subwoofer).
The display shows connected speakers.
When automatic detection is finished, the display
returns to the original.
How speakers are displayed
L : Front left C : Center
SB : Surround back
VOLUME
HDMI
SETUP MIC
- -
L AUDIO R SETUP MIC
AUX
• The standby indicator "^" goes off when
you turn the unit on.
back speakers
R : Front right S : Surround
W : Subwoofer
and the