Adjusting Speaker Output Level - Panasonic SA-XR70 Operating Instructions Manual

1. Select.
INPUT SELECTOR
SUBW YES
YES
1. Select the input position.
INPUT SELECTOR
TV
TV, DVR, DVD, CD
1. Select "DVD" or "DVR".
INPUT SELECTOR
DVD
DVD DVR
1. Select the input position.
INPUT SELECTOR
TV
TV, DVR, DVD, CD
1. Select the speaker.
INPUT SELECTOR
FRONT
FRONT, CENTER,
SURROUND,
SUR BACK, SUB-WFR
1. Select the speaker.
INPUT SELECTOR
FRONT
FRONT, CENTER,
SURROUND,
SUR BACK
1. Change the setting.
INPUT SELECTOR
100
100, 150, 200
1. Select "DISPLAY" or "VIDEO".
INPUT SELECTOR
DISPLAY
DISPLAY VIDEO
2. Change the setting.
INPUT SELECTOR
NO
LCR S SB : All speakers connected
L_R S SB : No center speaker
LCR S _ _ : No surround back speaker
L_R S _ _ : No center and surround back speaker
LCR _ _ _ : No surround speaker
L_R _ _ _ : Only front speaker
2. Change the setting.
INPUT SELECTOR
2. Change the setting.
INPUT SELECTOR
2. Change the setting.
INPUT SELECTOR
2. Change the setting.
INPUT SELECTOR
2. Change the setting.
INPUT SELECTOR
LCR S SB
OPT 1
OPT 1, OPT 2,
COAX 1, COAX 2
AUTO
AUTO, ANALOG,
DIGITAL, PCM FIX
SMALL
NONE, SMALL, LARGE
NO, YES
10 FEET
3 FEET 30 FEET
OFF
OFF ON
2 Adjusting speaker
output level
C (center), RS (right surround), SB (surround
back) and LS (left surround) can be adjusted
between –10 dB and +10 dB, with 0 being the
level of the front speakers.
Adjust center, surround and surround back
output to the same apparent level as the front
speakers.
For SW (subwoofer), you can select "MIN" for
minimum output, a level between 1 and 19, or
"MAX" for maximum output. Adjust subwoofer
output so it is balanced with that from the front
speakers. Subwoofer output is easily influenced
by the source. You can also change its level
while playing something for better effect
(á page 23).
Turn SPEAKERS A or
1
BI-WIRE on.
SPEAKERS
SPEAKERS A:
A
BI-WIRE
SPEAKERS
BI-WIRE:
A
BI-WIRE
Press both at the same time.
• If SPEAKERS B is selected, the test signal
will not be output.
Output the signal.
2
TEST L
-TEST
-SETUP
Two seconds each.
L C
SW
• When the test signal is output with a HDMI
connection, the video signal will not be output
to the TV.
Adjust the main volume.
3
VOLUME
VOL- 50dB
--dB (minimum) 0 dB (maximum)
Select the speaker
4
channel.
LEVEL
C
C, RS, SB, LS, SW
Adjust the level.c
5
– +
w q
C
-10 dB
MIN, 1
Stop the test signal.
6
-TEST
-SETUP
B
B
R RS
LS SB
0dB
- 4dB
+10 dB
19, MAX
15