Table of Contents
Advertisement
Sound is output from the speakers connected to the FRONT B terminals on this unit.
Using
SPEAKERS B
Press
ADVANCED DUAL AMP activates automatically when you use 2-channel stereo playback or 5.1-channel
playback.
ADVANCED
DUAL AMP
The "ADVANCED DUAL AMP" indicator stays on while this function
is on.
This function activates automatically when you play analogue audio sources or 2-channel PCM signals
through bi-wire connections.
BI-AMP
• Connect bi-wire speakers (
• Select "YES " in "Making bi-wire setting" (
• Press [SURROUND] off (
Enjoying DVD-
Audio sources
through digital
connections
Playing
Playing DVD
DVD-Audio
ANALOG 6CH
Enjoying high
quality 2-channel
analogue sounds
Note
SPEAKERS B
• Playback is in 2-channel stereo when you select "SPEAKERS
B" only.
• When only "SPEAKERS B" is selected and the input source is
surround, "2CH MIX" appears on the display.
• Selected speakers output sounds assigned to front 2 channels
when you make DVD ANALOG 6CH connections.
• If you select "SPEAKERS B" only, the following are set
automatically irrespective of settings selected in "Setting
speakers and their sizes" (á page 33).
Speaker size: "LARGE "
Subwoofer:
"NO " (Bass is output from the front speakers.)
• Settings made through the auto speaker setup (á pages 22
and 23) are cancelled.
ADVANCED DUAL AMP (á page 37)
• The unit takes advantage of unused amps, and runs one
speaker with 2 amps when this function is on. ADVANCED
DUAL AMP offers you sounds that are clearer and higher in
audio quality than those available in normal playback. In 2-
channel stereo playback, 3 speaker amps drive front
speakers. The operation is called the triple amp mode.
2-channel stereo playback: Front, surround and surround back
speaker amps are used for driving front speakers (triple amp
mode).
5.1-channel playback: Front and surround back speaker amps
are used for driving front speakers (dual amp mode).
SPEAKERS
to switch "
" on.
B
B
page 20).
á
pages 12 and 24).
á
Connect the unit to a DVD recorder or DVD player using the HDMI cable (
digital cable (COAXIAL1) (
• Make analogue 6-channel connections
(
page 18).
á
• Select "SPEAKERS A" or turn bi-wire
speakers on (á page 24).
• Switch the input source to "BD/DVD "
(
page 24).
á
Press and hold
"DVD 6CH " is displayed.
You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1 Cancel the "DVD 6CH " setting. (above)
2 Set the input signal to "ANALOG " in "Setting input signals". (
SPEAKERS
B
• You can also set the ADVANCED
• The "BI-AMP" indicator stays on while
• Refer to "Making BI-AMP settings"
page 20).
á
pages 14 and 15).
á
PLAYER
BD/DVD
• To cancel, press and hold until
until
ANALOG 6CH
BI-AMP (á page 37)
• The unit takes advantage of the front speaker and the
surround speaker amps, and drives the speakers' high-
frequency and low-frequency ranges separately when this
function is on.
• ADVANCED DUAL AMP is available with BI-AMP. When
combined, the two functions enhance clarity and audio quality
of stereo sounds.
• When you make bi-wire setting (á page 20), both BI-AMP and
ADVANCED DUAL AMP take effect as long as overlap is
possible. In such case, ADVANCED DUAL AMP activates in
the dual amp mode.
Select "OFF " in "Cancelling BI-AMP (using the triple amp
mode)" (á page 34) when you wish to use the triple amp
mode.
• You cannot use BI-AMP with analogue 6-channel connections
for DVD-Audio sources.
Playing DVD-Audio
Make the following speaker settings on the DVD recorder or the
DVD player. (They are normal factory settings for the DVD
recorder and the DVD player.)
• Speaker size: "LARGE " for all speakers
• Speaker presence: present for all speakers
• Distance setting: 0 or an equal distance for all speakers
To turn off speakers connected
to the FRONT A terminals
Switch "
" on the display off by
A
pressing [SPEAKERS A].
DUAL AMP off (á page 34).
BI-AMP is at work.
(á page 34) for detailed settings.
page 7) or a
á
When the unit is connected to a
DVD recorder
Playback is unavailable while the
input source is "DVR ". Make
analogue 6-channel connections
and switch the mode to "BD/DVD ".
"BD/DVD " is displayed.
page 35)
á
25
RQT8743
Advertisement
Table of Contents
