Using The Tft Monitor - Audiovox VME9020TS Manual & Warranty

USING THE TFT MONITOR

Open/Close TFT Monitor
Press the OPEN button (12) on the front panel or press the ( ) button (25) of the front
zone remote control to open/close the monitor.
TFT Monitor Auto Open
• If "TFT Auto Open" is "on" when the unit is turned on, the monitor automatically
moves to the last viewing position.
• If "TFT Auto Open" is "off" when the unit is turned on, press the OPEN button (12)
or ( ) button (25) on the front zone remote control to move the monitor into the desi-
red viewing position.
Monitor Tilt Angle Adjustment
A known characteristic of LCD panels is the quality of the display in relationship to the
viewing angle. The monitor angle can be adjusted for optimum viewing using one of
the following methods:
• Press the ( ) or ( ) buttons (3, 4) on the remote control or the CH+ or CH- button
^ ^
(14, 15) on the front of the unit to adjust the tilt angle of the screen one step at a time
• Press and hold the to adjust the tilt angle of the screen one step at a time.
Rear Camera Mode
When the vehicle is placed in "Reverse", and an optional rear camera is connected to
the VME9020TS, the TFT monitor will automatically switch to the camera input source.
Aspect Ratio
The following sources only have the WIDE and OFF aspect ratio option: AM/FM RDS
Tuner, CD-DA, SD Card, DVD+R/RW, DVD-R/RW and CD-R/RW with music files.
Press the WIDE button (28) on the remote control to adjust the aspect ratio as follows:
v
v
20