Connecting To Your Monitor - Audiovox AVDBR1 Owner's Manual

Installation

Connecting to Your Monitor

HDMI Jack
Audio and video connections to a monitor
can be done with a HDMI cable (not
supplied) if your monitor has a HDMI input.
1. Turn off the power to the Blu-ray player
and the monitor(s) before making any
connections.
2. Connect the HDMI OUT jack on the
rear of the unit to the HDMI IN jack on
your monitor using a HDMI cable (not
included).
3. Select the resolution of the player's
HDMI output signals to match your
monitor's resolution capabilities. See the
instructions on page 35 for details.
To HDMI
output
Notes
• Refer to the owner's manual of the
connected monitor as well.
• HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI licensing LLC.
• If your monitor is a high definition
monitor with an HDMI input, we highly
recommend you use the player's HDMI
output to get the highest possible video
resolution.
Monitor
To HDMI
input
HDMI cable
(not supplied
)
Rear of
the unit
LINE OUTPUT Jacks (Audio and Video)
Audio and video connections to a
monitor can be done with RCA-type video
connections.
1. Turn off the power to the Blu-ray player
and the monitor(s) before making any
connections.
2. Connect the LINE OUTPUT jacks on the
rear of the unit to the AUDIO/VIDEO IN
jacks on your monitor using an audio/
video cable (supplied).
Match the color-coded plugs to the
appropriate jacks: Yellow (video) to
Yellow, White (left audio) to White, and
Red (right audio) to Red.
Monitor
VIDEO IN
AUDIO
IN
Rear of the unit
VIDEO
Audio/Video cable (supplied)
Notes
• If one of the devices is not working,
check that all the cables have been
inserted properly into the jacks.
• If your component has only one input
for audio (mono), connect it to the
left (white L/Mono) audio jack on the
monitor and don't connect the right
audio part of the cable.
- 10 -
RIGHT
AUDIO LEFT