Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZCM5160
Summary of Contents for Zanussi ZCM5160
- Page 1 INSTRUCTION BOOK ELECTRIC GAS COOKER ZCM 5160...
-
Page 2: Table Of Contents
CONTENTS Instructions for the user Instructions for the installer Technical Features Advice for safety Warnings Installation Description of the appliance Oven lamp replacement Use of the appliance Change of gas Advice for use Maintenance and clening What to do if the appliance does not work Guarantee conditions After Sales Service... -
Page 3: Technical Features
TECHNICAL FEATURES Free standing Classe 1 Cover Enamelled Pan support Enamelled Front right Rapid 2,6kW Back right Auxiliary 1,0kW Front left Semirapid 2,0kW Back left Rapid electric plate 1,5kW Oven Electric Oven Over burner power 1700W Grill electric Grill burner power 1800W Light in the oven Lamp 15W type E14... -
Page 4: Warnings
WARNINGS It is very important that this instruction book In case you use electric appliances near the should be kept safety for future consultation. If it cooker (for instance an electric mixer) the should be sold or given to another person, please cables should not come into touch with the hot ensure that the booklet goes together with it, so parts of the cooker or fastened by the oven... - Page 5 Never use the ignited burners without a pot on. For reasons of good culinary results, hygiene and safety this appliance must always be kept clean, the fat sprinklers could give off unpleasant smells. Clean your cooker after each guaranteeing a right functioning. Never use steam or high pressure appliances for cleaning the oven (exactingness related to electric safety).
-
Page 6: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE Control panel Model : ZCM 5160 OVEN ZANUSSI OVEN HOT PLATE MAIN PILOTS THERMOSTAT IGNITION OVEN FRONT BACK BACK FRONT SWITCH KNOB LEFT LEFT RIGHT RIGHT BURNER HOT PLATE BURNER BURNER CONTROL CONTROL CONTROL CONTROL KNOB... -
Page 7: Use Of The Appliance
USE OF THE APPLIANCE 1. Electric traditional oven Before the first use ensure that the room well ventilated: V.M.C. (Mechanic ventilation) opened window. How to proceed ? 1. Lift the lid. 2. Remove the oven accessories. 3. Detach the adhesive labels, the foil protection if there is. - Page 8 If you want more heat coming from the bottom or more heat coming from the top, turn the knob so as to place the pointer on the symbol (bottom heat) or (top heat). Under these circumstances the temperature will never exceed about 215ºC in the bottom heat and in the top heat position too.
- Page 9 fig. 5...
- Page 10 Grilling Heat comes from the top of the oven. It is suitable for grilling meat (beef bacon, pork bacon …) that remains tender, for toast or to brown already cooked. When using the grill it has to be supervised, oven door opened protective screen in its place.
- Page 11 The Hob Burners To the symbol on the knob corresponds a symbol on the control panel (fig. 8). Each burner has a safety device. In case the flame dies out the safety device stops the gas supply. Maximum level Minimum level Use the maximum level for boiling and the minimum for smothering and maintaining boiling.
- Page 12 Do not put on the hob things or food liable to melt. Hot plate Depending on the cooking the knob for hot plate can be fixed on 6 different positions (fig. 11), from 6 (maximum heat) to 1 (minimum heat). To spare the hot plate and for saving power, we advise you: 1.
-
Page 13: Advice For Use
Accessories delivered with the appliance Beside accessories delivered with the appliance we advise you to use only heat proof pots (according to the instructions of the manufacturer). Your cooker is equipped with (fig.14): a grate, pan support for putting the dishes on (roast, pastry moulds …) The dish has to be put in the middle of the grate to balance the weight. -
Page 14: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before cleaning, check that the knobs are on “off” position, that the appliance has cooled completely that disconnected. Never use abrasive powder or wire sponge for cleaning the appliance. Burners Clean the covers with warm water and mild detergent, remove all crust. -
Page 15: What To Do If The Appliance Does Not Work
WHAT TO DO IF THE APPLIANCE DOES NOT WORK If the appliance does not work properly, check the following points before asking for service; there could be simple problems that you could remedy by yourself; if not, contact your after sales service. Symptoms Solutions No burner ignites... -
Page 16: Guarantee Conditions
GUARANTEE CONDITIONS Guarantee stipulated in the contract if the damages are due to shock , abnominal 1 year starting from setting into function the power variation, etc., or non-observing of the manufacturer will replace the damaged parts installation and use conditions stipulated in except cases mentioned... -
Page 17: Instructions For The Installer
INSTRUCTIONS FOR THE INSTALLER Electric connection ADVICE FOR SAFETY Before installation ensure that the local Check that: distribution conditions (gas nature the power of the installation is enough; pressure) and the pre-setting of the appliance the supplying lines are in good conditions; are consistent;... -
Page 18: Installation
INSTALLATION Placement Remove the plastic packaging and install the cooker in a dry, ventilated room (fig. 18) not near curtains, paper, alcohol, petrol, etc…) The appliance has to be set on a heatproof soil. This appliance belongs to class “X” in matters of protection against overheating of surrounding surfaces. - Page 19 Flexible pipe Flexible pipe (mechanic connection) max length 1.5 m; We advice to use a flexible pipe, according to Pipe Pipe the national rule in force, not shorter than 1 m, flexible flexible depending on the position of the tap; Connect one end of the pipe to the blocking tap, than, before placing the appliance between the furniture, connect the other end to the pipe...
- Page 20 Note: In case of a direct connection to the mains you have to interpose an omnipolar switch a minimum opening between contacts of 3 mm. The switch should be sited within 2m of the hob and be easily accessible upon completion of the installation.
-
Page 21: Oven Lamp Replacement
OVEN LAMP REPLACEMENT Ensure that the appliance is switched off before replacing the lamp to avoid possibility of electric shock. This lamp of 15 W, convection E 14 (230/240V) is a special lamp for “higher” temperature, up to 300°C. It is supplied on order, by your After Sales Service. - Page 22 Replacement of the nozzles Every appliance has spare nozzles for every gas. The whole of every nozzle is marked in microns on the nozzle. For changing the nozzles: 1. Remove the pan support; 2. Remove the burners; 3. Using a socket spanner 7 unscrew the nozzles (fig.