Table of Contents
Advertisement
ICP-CP508 | User's Guide | 4.0 Arming and Disarming
3.7
On Indicator/Zone In Alarm
The
indicator appears when the system
is armed and flashes when an alarm occurs.
The indicator resets after a valid User Code
is entered.
4.0 Arming and Disarming
4.1
Arming in AWAY Mode
When you leave your premises and require all
zones to be in a ready state to detect intrusion, you
arm the system in AWAY Mode. When returning
to your premises, disarm your system so that you
do not sound a false alarm.
There are two different methods for arming the
system in AWAY Mode. Method one is standard
and always operates. Method two is optional and
may be disabled by your installer if you do not
want to use single button arming.
Arming in AWAY Mode, Method 1
Enter your user code followed by the [#] key (for
example, [2 5 8 0 #]). Two beeps sound and the
AWAY indicator displays. Exit time starts
counting.
Arming in AWAY Mode, Method 2
Hold down the [#] key until two beeps sound.
The AWAY indicator appears and exit time starts
counting.
4.2
Disarming from AWAY Mode
Enter your user code followed by the [#] key (for
example, [2 5 8 0 #]). Two beeps sound.
4.3
Arming in STAY Mode
STAY Mode 1 is used when you need to arm the
perimeter and unused areas of the premises to
detect a would-be intruder entering the premises,
while at the same time being able to move freely
within an area that is automatically isolated.
STAY Mode 2 is used when you need to arm the
perimeter and unused areas of the premises to
detect a would-be intruder from entering the
premises, while at the same time being able to
move freely within an area that is automatically
isolated.
Arming in STAY Mode 1
Press and hold [STAY]. When two beeps sound,
release the button. The STAY indicator lights and
Exit Time starts.
Arming in STAY Mode 1
Press and hold [0].When two beeps sound, release
the button. The STAY indicator lights and the Exit
Time starts.
Bosch Security Systems, Inc. | 9/08 | F01U089856-01
4.4
Disarming from STAY Modes 1
and 2
Enter your code and press [STAY]. Two beeps
sound and the STAY indicator extinguishes. The
system is now disarmed.
5.0 User Codes
5.1 Adding a User Code
1. Enter your four-character Master Code,
followed by [1] and [#] (for example,
[2 5 8 0 1 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
2. Enter the user code number (1 to 8) followed
by the [#] key (for example, [2 #] = User 2, [8
#] = User 8). Two beeps sound and the
selected user number appears on the codepad
indicators.
3. Enter the digits required for the new code
followed by the [#] key (for example, for user
code 5768, enter [5 7 6 8 #]). Two beeps
sound and the STAY and AWAY indicators
turn dark.
To add or change other user codes, repeat this
procedure as many times as required.
5.2
Deleting a User Code
Enter your four-character Master Code, followed
by the [1] and [#] keys (for example, [2 5 8 0 1 #]).
Three beeps sound and the STAY and AWAY
indicators flash.
Enter the user code number (User Code 1 to 8,
Radio User Code 9 to 16), followed by the [#] key
(for example, [2 #] = User 2, [1 6 #] = User 16).
Two beeps sound and the selected user number
appears on the codepad indicators.
Press the [*] key to delete the selected user code.
Two beeps sound and the STAY and AWAY
indicators turn dark. To delete other user codes,
repeat this procedure as many times as required.
6.0 Isolating Zones
Isolating zones allow you to manually disable one
or more zones before arming the system. Once a
zone is isolated, you can access that zone during
the armed state without activating an alarm.
For example, you might need to isolate a zone
because before arming the system a PIR detector
might generate a false alarm, or you need to leave
a pet inside a particular zone while away.
Isolating zones is performed by one of two
methods. Method two is optional and allows only
those user codes programmed by your installer
access to isolate zones.
EN | 5
Hide quick links:
Advertisement
Table of Contents
