Table of Contents
Advertisement
Adjusting the door balance
After the door panel, the adjustment of the door
balance may be necessary.
The door of the dishwasher is balanced when it is
open in any position.
For this purpose use the two front screws. Open
45
the door, remove the caps and screw or unscrew
the screws.
In this way the tension of the door balancing
springs is increased or decreased respectively.
Insert the caps again.
The weight of the panel should be within the
II09
limits given in "The furniture door" otherwise
balancing the door will not be possible.
Levelling
Good levelling is essential for correct closure and
sealing of the door. When the appliance is correctly
levelled, the door will not catch on the levelling
spacers, either side of the cabinet.
If the door does not close correctly, loosen or
tighten the adjustable feet until the machine is
perfectly level.
Securing under a counter
Secure the dishwasher to the counter on the front
part by means of two 3.5 x 16 screws provided
(see fig. - point A).
A
Important: the dishwasher must be secured
against tilting. Therefore, make sure that the
counter it is fitted under, is suitably secured to
a fixed structure (adjacent kitchen cabinets,
wall).
II03
50
PFI03GB
Hide quick links:
Advertisement
Table of Contents
