Related Manuals for Zanussi DTI 6726
Summary of Contents for Zanussi DTI 6726
- Page 1 LAVAVAJILLAS DISHWASHER MAQUINA DE LAVAR LOIÇA DTI 6726 MANUAL DE INSTRUCCIONES INSTRUCTION BOOKLET INSTRUÇÕES DE UTILIZAÇÃO 152991 25/1...
- Page 2 Warranty Card Certificate, on the back of which are written the relative conditions. Please fill in the necessary details on the Card Certificate and send it to the Zanussi Centre relative to the area in which the appliance is to be installed, within twenty days of the date of purchase. (See list of Zanussi network centres).
-
Page 3: Table Of Contents
Contents For the user For the installer Important safety information Installation instruction Technical specifications Description of the appliance Building-in features The control panel Fitting under a counter Water supply connections Before use Water outlet connection Setting the water softener Electrical connection Rinse aid Use of detergent Building-in... -
Page 4: Description Of The Appliance
Description of the appliance IN85 1. Water hardness adjustment 10. Large filter 2. Levelling spacers 11. Central filter 3. Upper basket stop 12. Upper spray arm 4. Salt container 13. Upper basket 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. -
Page 5: The Control Panel
The control panel In this fully integrated appliance the controls are 4. Programme marker located on the top of the door. When selecting a Depress the button corresponding to the programme, the door needs to be partially opened. desired washing programme (see “Washing programme”... -
Page 6: Before Use
Before use Before using your dishwasher for the first time: 1. ensure that the electrical and water connections comply with the installation instructions 2. remove all packaging from inside the appliance 3. set the water softener 4. pour 1 litre of water inside the salt container and then fill with salt 5. -
Page 7: Filling With Salt
Filling with salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher, specially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme). -
Page 8: Rinse Aid
Rinse aid Rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. -
Page 9: Use Of Detergent
Use of detergent Only use detergents specifically designed for use in dishwashers. To fill the dishwasher with detergent proceed as follows: 1. Open the dispenser lid by pulling the catch (D). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the same, you should also consult the instructions on the packet specially for tablets. -
Page 10: Using Your Appliance
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. -
Page 11: Adjusting The Height Of The Upper Basket
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Glasses with long stems can be placed upside down in the raised cup racks. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move. -
Page 12: Hints And Tips
Hints and tips To save energy Items not suitable for dishwashers: The following items should not be washed in Place dishes in the machine immediately after the dishwasher (unless they are sold as every meal and wait until the dishwasher is full dishwasher proof): before washing. -
Page 13: Washing Programmes
Washing programmes Starting Required Recommended quantity Programme Cycle Degree of soil of detergent position of the pushbuttons description on the in the programmer type of load dispenser dispenser NORMAL 65°C Normal soil. Cold prewash WITH Main wash up to 65°C Crockery, cutlery 25 g 1 cold rinse... -
Page 14: Operating Sequence
Operating sequence Check the filters Start the programme Ensure they are clean and properly Depress the On/Off button. positioned (see cleaning instructions). Close the door and the machine will start. Check that there is rinse aid At the end of the washing and salt programme At the end of the washing programme the... -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°C wash programme without dishes using detergent. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter... -
Page 16: External Cleaning
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc..). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. -
Page 17: Something Not Working
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom Solution The machine will not start The door has not been properly closed. -
Page 18: Service And Spare Parts
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Service and spare parts Prod.No. -
Page 19: Installation Instruction
Installation instruction Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications DIMENSIONS Width... -
Page 20: Fitting Under A Counter
Fitting under a counter (kitchen worktop or sink) It is absolutely essential that the dishwasher is disconnected from the electricity supply before gaining access to any internal component. Fit the dishwasher into appropriate housing space and connect it. Make the electrical and water connections as detailed in the following pages. -
Page 21: Water Outlet Connection
Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. -
Page 22: Building-In
The furniture door The door on this appliance is designed for the overlay of a panel having the following dimensions: Width 596 mm Height 644 - 724 mm max Thickness 20 mm max Weight 2 - 7.5 kg max The panel height should be no more than indicated, otherwise complete opening of the door will not be possible as the furniture door panel will hit against the dishwasher plinth. -
Page 23: Fixing To The Adjacent Units
Fixing to the adjacent units To prevent the dishwasher tilting, it must be secured to either the worktop or adjacent kitchen cabinet/wall using the brackets supplied. Insert the two fixing brackets into the slots provided in the top front part of the dishwasher as shown in the figure. Secure the brackets to adjacent units with the 3.5 x 16 screws using the upper or the side holes. - Page 24 1 04/99...