Table of Contents
Advertisement
Check that the WRD is not clogged with detergent
residue. If necessary, rinse it under running water
after having removed it from the basket by twisting
it anticlockwise and pulling it upwards.
Refit the dispenser by following the above
instructions in reverse order.
Fasten it back onto the support by turning it
clockwise.
Never use your dishwasher without the
WRD dispenser.
Since WRD also ensures correct
distribution of the water to the upper
spray arm, running the dishwasher
without it will impair the washing results.
External cleaning
Clean the external surfaces of the machine and
control panel with a damp cloth. If necessary use
only neutral detergents. Never use abrasive
products, scouring pads or solvent (acetone,
trichloroethylene etc...).
Prolonged periods of non-operation
If you are not using the machine for any period of
time you are advised to:
Unplug the appliance and turn off the water;
Fill the rinse aid dispenser;
Leave the door ajar to prevent the formation of
any unpleasant smells;
Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable,
empty the machine, close the appliance door,
disconnect the water inlet pipe and empty it.
Moving the machine
If you have to move the machine (moving
house etc...):
Unplug it;
Turn off the water tap;
Remove the water inlet and discharge;
Pull the machine out together with the hoses.
Avoid tilting the machine during transport.
MA06
42
PMC04GB
Hide quick links:
Advertisement
Table of Contents
