Controller; Motor - Smooth Fitness 5.65iS User Manual

26 5.65iS TREADMILL
TROUBLESHOOTING
Problem
Treadmill stops suddenly
E01
E02
E 03
E05
----------
No belt movement
Erratic display function
Reason
Safety key fell off
Blown fuse
Power cord not plugged in
Electronic problem
Stop button is held during
program set up
Data cable loose or defective Reconnect or Change the
Computer could be defective Call an authorized service
Transformer could be
defective
Controller could be defective
Motor wire connection is
loose or motor is defective
The connection wire
between the motor and
controller is loose or
controller defective
Incorrect speed sensor
position
Improper speed sensor wire
connection
Speed sensor could be
defective
Controller could be defective Call an authorized service
Controller could be defective Call an authorized service
Motor could be defective
Computer cannot sense the
safety key signal
Motor is not receiving power
Computer memory loss
Fix
Replace the safety key.
Change fuse
Plug into outlet
Call an authorized service
technician
Remove and replace safety
key to reset.
wire
technician
Reconnect the wire or Call
an authorized service
technician
Adjust the speed sensor
Reconnect the wire.
Replace the speed sensor
technician
technician
Call an authorized service
technician
Check and reset the safety
key.
Call an authorized service
technician
Turn off and unplug the
treadmill for 5 minutes and
retry.