Filling With Rinse Aid; Adjusting The Dosage Of Rinse Aid - Zanussi ZDT200 User Manual

156997470en.qxp 12/27/2006

Filling with rinse aid

IMPORTANT!
Top up the rinse aid when the light on the
control panel illuminates.
CAUTION!
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid
detergent). This would damage the appliance.

Adjusting the dosage of rinse aid

Increase the dose if there are drops of water or
lime spots on the dishes after washing.
12
4:35 PM Page 12
Open the lid. Fill up with rinse aid.
The maximum level for
filling is indicated by
"max".
Open the lid.
Clean up any rinse aid
which overflows. Close
the lid and press until it
locks.
Reduce the dose if there are whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
Set the dosage level. Close the lid and press
(The dose is factory set until it locks.
in position 4).