Control Panel And Functions - Zanussi ZDT200 User Manual

156997470en.qxp 12/27/2006
Never use the dishwasher if the electrical
●
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.

Control panel and functions

In this fully integrated appliance the controls are located on the top of the door. When selecting a
washing programme, the door needs to be slightly open.
1. On-Off button
2. Delay start button
3. Programme/Cancel button
4. Programme lights
5. Indicator lights
4
4:35 PM Page 4
All sides of the dishwasher must never be
●
drilled to prevent damage to hydraulic and
electric components.
For electrical and water connection carefully
follow the instructions given in specific
paragraphs.
IMPORTANT!
Always remember that when performing
operations such as:
- selecting a washing programme,
- deactivation/activation of the audible signals,
- setting the water softener,
the appliance MUST be in setting mode:
Press On-Off button, no programme lights
●
are illuminated and End of cycle light
flashes = appliance in setting mode.
Press On-Off button, a programme light is
●
illuminated and End of cycle light is
illuminated with fixed light = last performed
programme still set.
In this case the programme has to be
cancelled (see instructions "Cancel a
washing programme in progress").
WARNING!