Safety Notes - Chauvet Lrgrnd 300E Beam User Manual

Before You Begin

Safety Notes

Personal Safety
Mounting and Rigging
Power and Wiring
Operation
-2-
Please read the following notes carefully because they include important safety information
about the installation, usage, and maintenance of this product.
It is important to read all these notes before starting to work with this product.
There are no user serviceable parts inside this product. Any reference to servicing it
you may find from now on in this User Manual will only apply to properly
CHAUVET® certified technicians. Do not open the housing or attempt any repairs
unless you are one of them.
Please refer to all applicable local codes and regulations for the proper installation
of this product.
Keep this manual for future consultation. If you sell this product to another user,
make sure that they also receive this manual.
•
Avoid direct eye exposure to the light source while the fixture is on.
•
Always disconnect this product from its power source before servicing.
•
Always connect this product to a grounded circuit to avoid the risk of electrocution.
•
Lamp explosion hazard! Do not open the lamp cover within five minutes of having
turned off the fixture.
•
The bulb remains hot for a long time after turn off. Never touch the bulb
barehanded and always handle it by its metallic contacts.
•
Do not touch this product's housing when operating because it may be very hot.
•
This product is for indoor use only! To prevent risk of fire or shock, do not expose
this product to rain or moisture.
•
Make sure there are no flammable materials close to this product while operating.
•
When hanging this product, always secure it to a fastening device using a safety
cable (not provided).
•
Do not carry this fixture from the head; use the handles instead.
•
Always make sure that you are connecting this product to the proper voltage, as
per the specifications in this manual or on the product's sticker.
•
Never connect this product to a dimmer pack.
•
Make sure the fixture's power cable is not crimped or damaged.
•
Never disconnect this product by pulling or tugging on the power cable.
•
Do not operate this fixture if you see damage on the housing, lenses, ultraviolet
filter, or cables; have the damaged parts replaced by an authorized technician at
once.
•
Do not aim this fixture toward any surface closer than 16 feet (5 m). Otherwise, you
may damage or overheat the illuminated surface.
•
Do not cover the ventilation slots when the fixture is operating to avoid internal
overheating.
•
Do not aim this fixture toward the Sun. Otherwise, the lenses could concentrate the
solar energy and cause internal overheating.
•
The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at a higher temperature.
•
In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Legend 300E Beam may require service, please
contact CHAUVET® Technical Support.
Legend 300E Beam User Manual Rev. 01f