Active Smart™ Maintenance - Fisher & Paykel E402B Installation Instructions And User Manual

Active Smart™ maintenance
27
Replacement of the interior light (Halogen Light Bulb)
EN
Unplug the refrigerator before replacing the bulb. The light bulb is located on the top roof of
the cabinet at the front.
Remove the lens cover using a small screwdriver. Insert the screwdriver in the front centre of the
lens cover and gently lever down. Pull out old bulb.
Do not touch the new bulb with your hand. Leave it in the plastic bag whilst slotting into
position.
Remove plastic bag when bulb is in position.
Replace lens cover.
Plug in the refrigerator. Light bulb should now glow.
Note: The replacement halogen bulb must not exceed 12 Volt/10 Watt. Bulbs are available from
your Fisher & Paykel Appliances Customer Care Centre.
Fig.25 Halogen light replacement
Important!
Your refrigerator is designed to operate for many years without the need for service checks.
However, if your refrigerator is malfunctioning, have it attended to by your Fisher & Paykel
Appliances Authorised Service Centre as soon as possible. All electrical repairs must be carried
out by an adequately trained service technician or qualified electrician.