Using Your Ice Maker - Fisher & Paykel E402B Installation Instructions And User Manual

Ice maker
First use
When you first turn your refrigerator on, the ice maker will be off.
To turn on use the
Use the or buttons to turn the ice maker on or off.
Ice maker is on.
Ice maker is off.
If the bin is full of ice, or inserted incorrectly, the ice maker will
not operate. When inserted correctly the scoop will be on the
right hand side (refer to Fig.17). If all bins are removed the ice
maker will not operate.
Discard the first bin of ice cubes made.
We recommend that you turn the ice maker off if:
– The water supply is off for several hours,
– The ice storage bin is to be removed for a period of time,
– You are going on holiday/vacation.
Information about your ice maker
The ice cube tray will fill with water once the freezer has reached
the correct temperature.
Ice making will continue until the storage bin is full.
Ice making will resume when the ice is used.
Your Ice & Water product comes with a smaller ice bin inside the
larger freezer bin. Attached to this is a scoop, which is for hygienic
access to the ice.
If a large amount of ice is required, remove the smaller storage bin
and allow ice to fall into the larger bin.
Important!
Avoid contact with the moving parts of the ejector mechanism, and
do not place your fingers on the automatic ice making mechanism
while the refrigerator is plugged in.
Do not consume coloured ice cubes – contact local authorised
service centre.
Ensure the ice maker is connected to the filter and to a drinkable
water supply only.
Installation of the water connection to the ice maker must be
completed by a qualified service technician or a qualified plumber
(see installation instructions).
button to scroll to the

Using your ice maker

screen.
17
Fig.16 Turning
ice maker on
E402B, E442B, E522B
RF540A
Fig.17 Ice storage bin and
scoop in correct position
EN