Table of Contents
Advertisement
SiRF Star IIe/LP
Bluetooth GPS
3. Hardware interface
3.1 Hardware Description
GPS&Charge
LED (LED 2)
The Bluetooth GPS has two LED light which each has two colors. One is GPS & Charge status LED, that is
named LED 2, and the other is Bluetooth & low power status LED, that is named LED 1. The status table of
LED shows as follows:
<State Table of LED>
LED1
BT & Low Power LED
LED1 Color and Action
Blue Flash
Purple–Red Flash
LED2
GPS & Charge LED
LED2 Color and Action
Dark
Green Flash
Red
Orange-Red Flash
<Note1>When the Bluetooth is active and LED 1 lights, it shows Bluetooth RF function. As long as the
Bluetooth RF is transmitting the LED light will flash. When Bluetooth doesn't connect the other Bluetooth device,
the LED 1 will be flash periodically. Therefore, it means that it broadcasts message to connect the other device
with Bluetooth function. If it connects the other Bluetooth device and transmits data, LED 1 will flash very
quickly and look like bright.
<Note 2>When the battery is charging, LED 1 will show purple-red color and flash. The reason that Bluetooth is
working cause LED 1 purple-red color. If the GPS receiver go to the end of charge, LED 1 will show blue color
and flash.
3.2 Turn on/off
Turn on
Turn off
Rikaline
International Corp.
Tel: ++886 2 2370 4688
GPS-6030 Operating Manual
To turn on the receiver, press the power button on the topside briefly (0.5 seconds). The
left LED(LED 2) indicator will flash briefly. The right LED (LED 1) indicator will start
flashing.
To turn off the receiver, press the power button on the topside for 3 seconds. The LED
indicator will flash briefly before switching off the receiver.
10F, 64, Kang-Ding Road, Taipei 108, Taiwan
Fax: ++886 2 2370 4686
Description
Bluetooth Active
Yes
Yes
Description
Battery Charged
No
No
Yes
Yes
E-Mail: info@rikaline.com.tw
Rikaline
BT&Low
Power LED
(LED 1)
Power Button
External
Antenna
Connector
Low Power
No
Yes
Position Fixed
No
Yes
No
Yes
Web: www.rikaline.com.tw
7
Advertisement
Table of Contents
