Deleting Data From A Memory Card - Casio CTK-5200 User Manual

5. br
Press the (10-key) [9] (ENTER) key.
* * * * * * * *
• Pressing [7] (EXIT) will return to the screen that was
displayed before you pressed [9] (ENTER).
6. br
Use the (10-key) [–] and [+] keys to select
the data (file) you want to load.
br
7.
Press the (10-key) [9] (ENTER) key.
This will load the data into Digital Keyboard memory.
C o m
• If there is already data stored in the user area where
you are trying to load data, an overwrite confirmation
message will appear. Press the
key to overwrite, or [–] (NO) or [7] (EXIT) key to cancel.
R e p
Flashes
p l e t e
br
(10-key) [+] (YES)
l a c e ?
Deleting Data from a Memory
Card
Use the following procedure to delete data saved on a
memory card.
1.
On the Digital Keyboard, select the data you
want to delete as described below.
To delete this
type of data
Sampled sound Select the tone number of the sampled
sound.
User rhythm Select the rhythm number of the user
rhythm.
User song Select the song number of the user
song.
Recorded song Select the song and put the Digital
Keyboard in playback standby.
Registration data
Select one of the Digital Keyboard's
default built in tones, songs.
All data
2.
Insert a memory card into the memory card slot.
3. bq
Hold down until the screen shown below
appears on the display.
• To cancel data delete, press
br
4.
Use the (10-key) [4] (o) and [6] (p) keys
to display one of the settings shown below.
• You also could use [–] and [+].
To delete this type
of data
Sampled sound "dEL" "SmplTone"
User rhythm "dEL" "UserRhy."
User song "dEL" "UserSong"
Recorded song "dEL" "Rec.Song"
Registration data "dEL" "Regist."
All data "dEL" "All Data"
Using a Memory Card
Do this
bq
again.
Display this screen
E-63