Layering Two Tones; Splitting The Keyboard Between Two Different Tones - Casio CTK-5200 User Manual

Layering Two Tones

You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1.
Select the first tone you want to use.
bn
Press (TONE) and then use
tone you want.
Example: 032 ELEC.PIANO 1
E . P i a n o 1
cp
2.
Press .
br
3.
Use (10-key) to select the second tone you
want.
Example: 205 STRINGS
S t r i n
4.
Play something on the keyboard.
Both tones sound at the same time.
cp
5.
Pressing again to unlayer the keyboard (so
it plays only the tone you selected in step 1).
cp
• Each press of toggles between layered (two tones)
and unlayered (one tone).
br
(10-key) to select the
Lights
s
g
Controlling the Keyboard Sounds
Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.
To select the two tones for a split keyboard
1.
Select the tone for the right side range (page
E-14).
bn
Press (TONE) and then use
tone you want.
Example: 303 FLUTE 1
F l u t e
co
2.
Press .
Lights
br
3.
Use (10-key) to select the left side range
tone you want.
Example: 064 VIBRAPHONE 1
V i b e s
4.
Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
Split point
F3
br
(10-key) to select the
1
1
FLUTE 1
E-15