Sampling Sounds And Playing Them On The Digital Keyboard; Connection And Preparation; Sampling And Playing A Melody Sound (Melody Sampling - Casio CTK-5200 User Manual

Sampling Sounds and Playing Them on the Digital
Keyboard
You can sample a sound from a portable audio player or other
device, and then play the sound on the keyboard. You can
sample and use passages from a CD. The sampling feature is
a great way to create new sounds that are highly creative.

Connection and Preparation

• Before connecting, make sure that this Digital
Keyboard, as well as the external device being
connected, are all turned off.
1.
Connect an external device to the Digital
Keyboard.
Stereo mini plug
Digital Keyboard AUDIO IN jack
• Connection of an external device requires commercially
available connecting cords, supplied by you.
Connecting cords should have a stereo mini plug on
one end and a plug that matches the configuration of
the external device on the other end.
2.
Turn down the volume levels of the external
device and the Digital Keyboard.
3.
Turn on the external device, and then turn on
the Digital Keyboard.
• Sampled sounds are recorded in monaural.
CD player, Cassette player,
etc.
bs bs bt bt ck ck cl cl cm cm cn cn
Sampling and Playing a Melody
Sound (Melody Sampling)
Use the procedures in this section to sample a sound and play
it as the melody part on the Digital Keyboard.
• Up to five sampled sounds can be stored in Digital
Keyboard memory as tone numbers 601 through 605.
Simply select the tone number where the sound you want is
located to assign the sound to the keyboard.
To sample a sound
1. bn
Press (TONE) and then use
enter the tone number (601 to 605) where you
want to store the sampled sound.
No sampled sound stored
N o
Lights
2. cr cs
Press and at the same time.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
W a i t i n
Flashes
bo bo bn bn br br
cr cr cs cs ct ct
br
(10-key) to
D a t a
g
E-19