Casio CTK-5200 User Manual page 27

Changing to Manual Sampling Stop
Normally the Digital Keyboard will stop sampling automatically
whenever it detects there is no sound input. You can use the
following procedure to enable manual sampling stop, which
will cause sampling to continue until you press a button to
stop it. You can use this to insert silence after the sampled
sound.
1. ct
Press (FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"SAMPLING" (page E-7).
2. br
Press the (10-key) [9] (ENTER) key.
3. br
Press the (10-key) [6] (p) key.
A u t o S t o
4. br
Press the (10-key) [–] key to turn off
automatic sampling stop.
Sampling continues until you perform one of the
operations below, even if nothing is being input from an
external device.
• Melody sampling (page E-19)
cr cs
Press and at the same time.
• Drum sampling (page E-22)
cr cs
Press and at the same time, or press any
keyboard key.
Sampling Sounds and Playing Them on the Digital Keyboard
Deleting a Sampled Sound
You can use the following procedure to specify a sampled
tone number and delete its data.
1.
Press
(10-key) [4] (o) and [6] (p) keys to display
"DELETE" (page E-7).
br
2.
Press the
p
Used memory
(Unit: Kbytes)
3.
Use the
the tone number of the data you want to delete.
4.
Press the
This displays a delete confirmation message.
5.
Press the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, "Complete" will
appear on the display followed by the screen in step 1
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see "Editing Sampled Drum Set
Sounds" on page E-23.
ct
(FUNCTION) and then use the
Flashes
D E L E T E
br
(10-key) [9] (ENTER) key.
S 1 : O r
br
(10-key) [–] and [+] keys to select
br
(10-key) [9] (ENTER) key.
S u r e ?
br
(10-key) [+] (YES) key to delete the
br
n l
g
Remaining
memory capacity
E-25