Operating Sequence - Zanussi ZWU 6120 Instruction Booklet

Operating sequence

Wash only
Before the first wash we recommend that you run a
cotton cycle at 95°C, with the machine empty, in
order to remove any manufacturing residue from the
drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash or the soak
programme, pour detergent into the appropriate
compartment marked
3. Measure out the additives
If required, pour fabric softener into the compartment
marked without exceeding the «MAX» mark.
.
.
4. Select the desired programme
Turn the programme selector dial to desired position:
the light corresponding to the different phases lights
up.
The display shows the duration of the programme.
5. Select the spin speed or the
(no spin) option
Press the SPIN button repeatedly, in order to select
the desired spin speed or the
The relevant light will light up.
6. Select the desired options
The light corresponding to the depressed button
illuminates.
16
(no spin) option.