Yamaha RAPTOR 700R Owner's Manual page 98

NOTE:
When adding oil, be careful not to overfill the en-
1
gine oil tank; the oil level rises faster starting from
the half-level-portion on the dipstick.
2
6. Insert the dipstick into the engine oil tank filler
hole, and then tighten the engine oil tank filler
3
cap.
4
ECB00360
CAUTION:
5
Make sure that the engine oil tank filler cap is
securely tightened, otherwise oil may seep out
6
when the engine is running.
7
To change the engine oil (with or without oil
filter element replacement)
8
1. Place the ATV on a level surface.
9 2. Start the engine, warm it up for several min-
utes, and then turn it off.
10
3. Place an oil pan under the engine to collect
the used oil.
11
4. Remove the engine oil filler cap and the crank-
case engine oil drain bolt.
1. Crankcase engine oil filler cap
1. Crankcase engine oil drain bolt
8-11
1
1