adjusting nut, distance A is changed by 1.5 mm
(0.06 in).
1
Spring preload setting:
2
Minimum (hard):
Distance A = 246.5 mm (9.7 in)
3
Standard:
Distance A = 255 mm (10.0 in)
4
Maximum (soft):
Distance A = 261.5 mm (10.3 in)
5
6
7
8
9
10
11
1. Distance A
ECB00080
Always tighten the locknut against the adjust-
ing nut, and then tighten it to the specified
torque.
Rebound damping force
Turn the adjusting screw in direction (a) to increase
the rebound damping force and thereby harden
the damping, and in direction (b) to decrease the
rebound damping force and thereby soften the
1
damping.
4-14
3. Tighten the locknut to the specified torque.
Tightening torque:
Locknut:
30 Nm (3.0 m·kgf, 22 ft·lbf)
CAUTION: