Yamaha RAPTOR 700R Owner's Manual page 37

adjusting nut, distance A is changed by 1.5 mm
(0.06 in).
Spring preload setting:
Minimum (hard):
Distance A = 228 mm (8.98 in)
Standard:
Distance A = 233 mm (9.17 in)
Maximum (soft):
Distance A = 243 mm (9.57 in)
1. Distance A
1
4-19
3. Tighten the locknut to the specified torque.
Tightening torque:
Locknut:
42 Nm (4.2 m·kgf, 30 ft·lbf)
ECB00080
CAUTION:
Always tighten the locknut against the adjust-
ing nut, and then tighten it to the specified
torque.
Rebound damping force
Turn the adjusting screw in direction (a) to increase
the rebound damping force and thereby harden
the damping, and in direction (b) to decrease the
rebound damping force and thereby soften the
damping.
1
2
3
4
5
6
7
8
9
10
11