Yamaha RAPTOR 700R Owner's Manual page 39

Compression damping setting (for fast com-
pression damping):
Minimum (soft):
Adjusting bolt 4 turn(s) out from the fully
turned in position
Standard:
Adjusting bolt 2 turn(s) out from the fully
turned in position
Maximum (hard):
Adjusting bolt fully turned in
NOTE:
Make sure that the position indicator marks are
aligned when the shock absorber assembly is set
to the standard setting.
Compression damping force (for slow compres-
sion damping)
1. To increase the compression damping force
and thereby harden the compression damp-
ing, turn the adjusting screw in direction (a).
To decrease the compression damping force
and thereby soften the compression damping,
turn the adjusting screw in direction (b).
(b)
1. Compression damping force adjusting screw (for slow
compression damping)
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
20 click(s) in direction (b)*
Standard:
11 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in di-
rection (a)
ECB00090
CAUTION:
Never turn an adjusting mechanism beyond
4-21
(a)
1
1
2
3
4
5
6
7
8
9
10
11