Yamaha RAPTOR 700R Owner's Manual page 121

1. Drive chain slack
3. If the drive chain slack is incorrect, adjust it as
follows.
To adjust the drive chain slack
1. Loosen the rear axle pinch bolts.
2. Insert a rod of a diameter of 8 mm (0.3 in) and
a length of 10 cm (4 in) into one of the holes in
the drive chain tensioner as shown.
3
4
1. Rear wheel axle pinch bolt
2. Rod
3. Drive chain tensioner
4. Hole
NOTE:
A rod can be obtained at a Yamaha dealer to make
this adjustment.
3. Shift the transmission into neutral.
4. To tighten the drive chain, push the ATV back-
ward. To loosen the drive chain, push the ATV
forward.
8-34
2 1
1
1
2
3
4
5
6
7
8
9
10
11