Front Wheel Removal; Front Wheel Installation - Yamaha Diversion XJ600N Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Speedometer cable

Front wheel removal

It is advisable to have a Yamaha
l
dealer service the wheel.
Securely support the motor-
l
cycle so there is no danger of it
falling over.
1. Place the motorcycle on the cen-
terstand.
2. Remove the speedometer cable
from the front wheel side.
3. Remove the calipers.
1. Wheel axle
2. Pinch bolt
EAU00868
NOTE:
EW000122
Do not depress the brake lever when
the disc and caliper are separated.
4. Loosen the pinch bolt.
5. Remove the wheel axle. Make
sure the motorcycle is properly
supported.

Front wheel installation

1. Install the speedometer gear unit
2. Lift up the wheel between the front
6-31
into the wheel hub. Make sure the
wheel hub and the speedometer
gear unit are installed with the pro-
jections meshed into the slots.
fork legs. Make sure the slot in the
speedometer gear unit fits over
the stopper on the front fork outer
tube.
EAU01469