Replacing The Taillight And Flasher Light Bulb; Front Wheel Removal - Yamaha DT501988 Owner's Manual

J-401
Replacing the taillight and flasher light
bulb:
1 . Remove the two screws, and now the
lens can be removed. Replace the oil seal,
if damaged.
2. Push in the bulb and turn it about 30°
to remove the bu lb.
3. For installation, reverse the above pro-
cedure.
U-073
NOTE:~~~~~~~~~~~~
Make sure the oil seal is positioned properly.
J-204
Front wheel removal
1. Elevate the front wheel by placing a
suitable stand under the engine.
2. Remove the speedometer cable from
front brake shoe plate: first remove the
clip and then pull cable out.
7-31
1. Speedometer cable
3. Remove the brake cable: loosen all cable
adjusters and remove the cable from
handlebar lever holder. Then remove the
cable from cam lever at the front brake
shoe plate.
4. Remove the cotter pin from front wheel
axle and remove the axle nut.