Yamaha Diversion XJ600N Owner's Manual page 56

1. Engine oil drain bolt
Engine oil and oil filter cartridge re-
placement
1. Warm up the engine for several
minutes.
2. Stop the engine. Place an oil pan
under the engine and remove the
oil filler cap.
3. Remove the drain bolt and drain
the oil.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Oil filter cartridge
2. Oil filter wrench
4. Remove the oil filter by using an oil
filter wrench.
NOTE:
An oil filter wrench is available at a
nearby Yamaha dealer.
5. Install the drain bolt and tighten it
to the specified torque.
Tightening torque:
Drain bolt:
43 Nm (4.3 mákg)
6-8
1. O-ring
6. Apply a light coat of engine oil to
the O-ring of the new oil filter.
NOTE:
Make sure the O-ring is seated proper-
ly.