3. Install the wheel axle and let the
motorcycle down.
4. Install the calipers and caliper
bolts. Make sure there is enough
gap between the brake pads be-
fore installing the calipers onto the
brake discs.
5. Push down hard on the handle-
bars several times to check for
proper fork operation.
6. Tighten the wheel axle, pinch bolt
and caliper bolts to the specified
torque.
PERIODIC MAINTENANCE AND MINOR REPAIR
Tightening torque:
Wheel axle:
58 Nm (5.8 mákg)
Pinch bolt:
40 Nm (4.0 mákg)
Caliper bolt:
19 Nm (1.9 mákg)
7. Install the speedometer cable.
6-32