Front Wheel Removal - Yamaha XT250M 1999 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Rear wheel service
Use a motorcycle stand or motor-
cycle jack to elevate the motorcycle
1
so the rear wheel is off the ground.
Alternatively, two jacks can be
2
placed under the
swingarm.
3
4
5
6
7
8
9
2
1
frame or
1. Disc cover
2. Speedometer cable
3. Holder
4. Axle nut
5. Cotter pin

Front wheel removal

w
8 It is advisable to have a
Yamaha dealer service the
wheel.
8 Securely support the motorcy-
cle so there is no danger of it
falling over.
1. Remove the engine guard.
3
4
5
NOTE:
Do not depress the brake lever
EAU00902
when the disc and caliper are sepa-
rated.
EW000122
6-33
2. Remove the disc cover, holder
and speedometer cable.
3. Remove the cotter pin and axle
nut.
4. Elevate the front wheel by
placing a suitable stand under
the engine.
5. Remove the axle and the front
wheel. Make sure the motorcy-
cle is properly supported.