Installation - Alpine ICS-X7 Quick Reference Manual

•
When making connections to the vehicle's electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the ICS-
X7 to the fuse box, make sure the fuse for the intended
circuit of the ICS-X7 has the appropriate amperage.
Failure to do so may result in damage to the unit and/or
the vehicle. When in doubt, consult your Alpine dealer.
•
The Display must be completely retracted in the casing
when installing. If it is not, problems may occur.
1
2
For safe use, make sure of the following:
location is stable and firm.
driver's view and operations are not obstructed.
microphone is located where the driver's voice
can be easily picked up (on the sun visor, etc.).
When you speak into the microphone, you should
not have to change your driving posture. This may
cause a distraction, taking your attention away
from safely driving your vehicle. Carefully consider
direction and distance while mounting the
microphone. Confirm that the driver's voice can be
easily picked up at the selected location.
12
-EN
Owner's manual
3
*
1
*1 If the installed mounting sleeve is loose in the
dashboard, the pressure plates may be bent slightly to
remedy the problem.
*2 The supplied face plate may be mounted.

Installation

* 2