4
•
For the screw marked "*2, " use an appropriate screw for
the chosen mounting location.
(If the ACC power supply is not available)
•
If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold
separately).
•
The diagram and the fuse amperage shown above are in the case when ICS-X7 is used individually.
•
If the switched power (ignition) lead of the ICS-X7 is connected directly to the positive (+) post of the vehicle's battery, the
ICS-X7 draws some current (several hundred milliamperes) even when its switch is placed in the OFF position, and the
battery may be discharged.
*
2
*
1
5
*1
13
-EN