Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for VIETA HMD400
Summary of Contents for VIETA HMD400
- Page 2 Important safety instructions – please read carefully and keep for future reference To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture. To prevent the risk of electric shock, do not remove the cover or back of this product. In case of product failure, only qualified personnel can repair.
-
Page 3: Important Safety Instruction
- This logo set on the product means that the recycling of this apparatus comes within the framework of the directive 2002/96/EC of January 27, 2003 concerning the waste on electrical and electronic equipment (WEEE). - The presence of dangerous substances in the electrical and electronic equipments can have potential consequences on the environment and human health in the cycle of reprocessing this product. - Page 4 INTRODUCTION Thank you for selecting VIETA as your lifestyle companion. To bring the functionalities of your device to an excellent condition,we suggest you to spend some time to read this manual before operating your device.The information contained in this manual will enhance your total experience in operating your device.
-
Page 5: Table Of Contents
CONTENT IMPORTANT SAFETY INSTRUCTION......................1 INTRODUCTION...............................3 CONTENT.................................4 LIST OF MAIN PARTS............................4 FUNCTIONAL DESCRIPTION OF PANEL.....................5 FUNCTIONAL DESCRIPTION OF REMOTE CONTROL.................6 CONNECTION OF DVD AND TV ........................7 SETTING OF DIGITAL AUDIO OUTPUT......................8 SYSTEM CONNECTION..........................9 BASIC OPERATIONAL INSTRUCTION....................10-15 DVD MENU SETUP..........................16-18 SPECIFICATION............................19 TROUBLESHOOTING...........................19 LIST OF MAIN PARTS Master Unit 1Piece... -
Page 6: Content
PANEL FUNCTION 1.STANDBY Press to standby mode 2.DISPLAY Show the dvd function 3.REMOTE SENSOR Receive the signal from remote control 4.SOURCE Coose the input source 5. .PLAY/PAUSE Sart or pause disc/mp3 play 6.PREV Sip to previous song or station 7.NEXT Sip to next song or station 8.OPEN/CLOSE Open and close the disc door... -
Page 7: Functional Description Of Panel
REAR PANEL ILLUSTRATION 1.R/L AUDIO OUTPUT 2.Pb/Y/Pr OUTPUT 3.COAXIAL OUTPUT 4.VIDEO OUTPUT 5.S-VIDEO OUTPUT 6.OPTICAL OUTPUT 7.2CH AMPLIFIER OUTPUT. 8.AUX IN INPUT 9..FM ANTENNA 10.AC230V INPUT... -
Page 8: Functional Description Of Remote Control
FUNCTIONFUNCTIONAL DESCRIPTION OF REMOTE CONTROL Range of operation of the remote control The remote control can be used up to approximately 16 feet/5 meters in straight line. It can also be operated at a horizontal angle up to 30 from the remote control sensor. Follow this precautions to avoid leaking or cracking cells: 1.Place the batteries in the remote control so they match the polarity:(+)to(+)and(-)to(-). -
Page 9: Connection Of Dvd And Tv
CONNECTION OF DVD AND TV 1.If your TV has AV terminals,connect this unit to TV with the attached AV cables,and set the TV to be AV status after confirming the connection is correct.(Figure 1) 2.If your TV has a jack for S-terminal,please use the S-terminal connection cable(not attached) to connect the DVD player,to obtain a higher quality images.(Figure 2) 3.If your TV has a component output terminals(also called chromatism output)please use three groups of connecting wires to connect the DVD component output with the input... -
Page 10: Setting Of Digital Audio Output
CONNECTION OF DIGITAL AUDI OUTPUT AND DOLBY DIGITAL STEREO The Setting of Digital Audio Output: 1.Connect the coaxial jack of DVD player and amplifier of DVD player and amplifier. 2.In the status of STOP or PLAY ,press STEUP key ,the system set page is displayed on the TV screen.And press the LEFT/RIGHT direction key to switch the cursor to AUDIO SET,and then press the DOWN direction key to move the cursor to the setting of DIGITAL OUTPUT ,press RIGHT direction key to switch to SPDIF/RAW or SPDIF/PCM,and press PLAY/ENTER key ,the SETUP key exits after completion. -
Page 11: System Connection
SYSTEM CONNECTOION Please connect the acoustics as the following figure .Please do not switch on the power supply before you finished all the parts connected. Note: 1.Please connect the wires firmly,otherwise this unit will has no sound or come into other troubles. -
Page 12: Basic Operational Instruction
BASIC INFORMATION ABOUT OPERATION PREPARATIVE: 1.Before turning on, make sure all connection of this unit and other sound devices are correct and reliable.Plug the power supply of this unit to the AC Power Socket. 2.Press POWER key on the panel. 3.Press EJECT key to move the tray into the deck,VCD or CD will automatically be played in several seconds.The DVD with caption directory will enter into the menu status,at this time ,press the direction keys (up,down,left,right)on the remote control ,move thecursor to the song to be played,and then press PLAY/ENTER key to enter into the playback... - Page 13 Once the “CD RIPPING COMPLETED” screen appears, you're done! You can now withdraw your USB and listen to the MP3 recorded anywhere you want! Useful Tips – Customizing your recordings The CD-RIPPING function allows you to change the setting of the following: 1) In the OPTION menu, you may adjust: - The speed of the recording (SPEED): This rate may be normal x1 (the CD will be played during recording) or x2 on Fast Mode (playback is turned off).
- Page 14 Useful Information – Frequently Asked Questions Recording Location - All of your recordings are saved in a folder called " RIPPING" - They are stored and named by sequential order: TRACK 1.MP3, TRACK 2.MP3,... If the CD RIPPING menu does not show - When you press the CD RIPPING button, message “INVALID ENTRY”...
-
Page 15: Content
8.Number Keys and Time Selcetion In playing songs ,press number keys(1~9) to directly select the songs you need.If the songs you want exceed 10th piece, you may do it by pressing 10+ key, and then press the number keys 1~9.For example:If 12th song is needed,you can press 10+ key first and press number key 2 to select this song. - Page 16 The Program Playback option allows you to enter the order in which you want chapters or tracksto play, maximum to 16. *Program Menu: SVCD, VCD, CD discs: DVD, MP3/JPEG discs: *According to the highlight, use the number keys to enter the chapters / tracks in the order you want them to play. Then press PLAY/ENTER or use direction keys to highlight the item and press PLAY/ENTER key.
-
Page 17: Dvd Menu Setup
remote control to enter CD/USB switch menu, choose USB item and press PLAY/ENTER key to begin reading USB device .In play USB status, repeat a mentioned process to return reading disc status. Note: *USB interface sort: USB 1.1 2.0 *Operable USB device: U disc, flash memory or Mp3 player with USB interface *Operable file format: compatible with MP3, JPEG, MPEG4 and DIVX 6 formats Remark: Depending on the capacity of the device, the reading can take more than 1 minute before lauching the video. - Page 18 General Steps of Setup Menu *Press the Setup key, the main setup menu appears.(When the main menu displayed, the DVD system will auto pause.) *Press the Left and Right direction keys to highlight the icon of the desired page, then press the Down or Right direction keys to activate that page.
- Page 19 1.8 Default Choose this option to resume all the setup options to default settings. 2. Language Setup 2.1 OSD LANGUAGE option, press the direction keys to choose the OSD language you prefer. There are 8 optional OSD languages: English and Thailand, German, Spanish, French, Portuguese. 2.2 AUDIO LANG option, press the direction keys to choose the audio language you prefer.
- Page 20 4.3 HUE: Use the Up and Down direction keys to move the scroll and adjust the hue. 4.4 SATURATION: Use the Up and Down direction keys to move the scroll and adjust the saturation. 4.5 SHARPNESS :Use the Up and Down direction keys to move the scroll and adjust the sharpness. 5.
-
Page 21: Specification
SPECIFICATION DISC TYPE DVD /VCD1.0 1.1 2.0/CD-DA/MP3 VIDEO TYPE DVD(MPEG2),VCD(MPEG1), MPEG4, DIVX 6 AUDIOTYPE MPEG1,MPEG2,PCM,STEREO VIDEO TYPE:NTSC or PAL SIGNAL OUTPUT VIDEO SIGNAL:1.0 Vp-p AUDIO:Mixed stereo,2V(RMS) INPUT AUDIO IN OUTPUT THREE BASE COLOR OUTPUT S-VIDEO VIDEO OUTPUT CABLE POWER REQUIERMENTS AC230V/50Hz POWER CONCUMPTION 405W... - Page 22 Important remarks about reading DivX videos on this unit - This unit is fully compatible with DIVX and its most advanced versions 5 and 6.xx. - No need for update ! This unit will be able to read all future versions of DIVX. - If you are experiencing some troubles when reading DIVX-encoded videos, please check out the 4 below points first : This unit can only read DivX videos recorded using an official codec released by the DivX company.