Table of Contents
Advertisement
Installation of Batteries in the Remote Control
1. Remove the battery compartment cover.
2. Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity diagrams in
the battery compartment.
*
About half a year of normal operation can be expected when using standard batteries.
*
When the batteries are exhausted, the remote will not function. Replace both batteries at the same
time with new ones.
*
Don't mix old and new batteries.
*
Don't mix different types of batteries.
*
When the unit is not used for a long period of time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
Turning the Power On and Off
You can use all the functions on the panel of the unit or the remote control after turning the system power
on (called Standby Mode).
Turning the System On
Press the standby button (
Caution: When turning the system on, the system will continue in the mode it was in when it was turned
off last time.
Turning the System Off
Press the standby button (
Caution: Be sure to unplug the power cord from the outlet when going away or when the system is not
in use for an extended period of time.
Button Functions
General Operate
In power on mode, press the DVD function button (
(You can also operate the key "
Press the open/close button (
disc tray (with the printed side up). Press this button again to close the disc tray, the unit will
read the disc and the disc type will display on the TV screen. The disc should play
automatically.
Press the direction buttons (
Press the confirmation button (
In stop mode, press the play/pause button (
When playing disc, press the play/pause button (
press the button again, it will continue to play.
(You can also operate the key "
) to turn the system on from standby mode.
STANDBY
) again to turn the system off (called Standby Mode).
STANDBY
FUNCTION
) on the unit to open the disc tray then place the disc on the
K
,
,
p
q
t
ENTER
BF
DVD
" on the panel of unit.)
,
) to move the cursor to illuminate the desired selection.
u
) to confirm the menu selection.
) to start playing the disc.
BF
BF
" on the panel of unit.)
- 8 -
) to select DVD function.
) to temporarily stop the playing,
Advertisement
Table of Contents
