Connecting The Fm Antenna; Connect To The Assistance Equipment - VIETA VMD500 Owner's Manual

Connecting the FM Antenna

FM outdoor antenna
Coaxial Cable

Connect to the assistance equipment

Terminal board for the DVD player
Assistance equipment's
terminal board
Terminal board for the DVD player
Assistance equipment
Using the supplied wire Antenna
Using the coaxial type connector
A 75Ohm antenna with coaxial type connector should be con-
nected to the FM 75 ohm coaxial terminal.
If reception is poor, connect the outside antenna.
Note: Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outside antenna), disconnect the sup-
plied FM wire antenna.
Caution: To avoid noise, keep antennas away from the system,
the connecting cord and the AC power cord.
Assistance equipment
Assistance equipment's
terminal board
This DVD player has a groups of audio input
terminals, you can use signal line to connect au-
dio input terminals of this unit and audio output
terminals of assistance equipment respectively,
then you can hear the sound sources.
This unit also has a group of audio output
terminals, you can use signal line to connect this
unit's audio output terminal and assistance
equipment's audio input terminal respectively, then
you can output the outer sound sources to other
assistance equipment.
- 4 -