VIETA VMD500 Owner's Manual page 14

Video Setup Page
l l l l l
DUAL MONO
Select the setting that matches the number of speak-
ers you have connected.
STEREO --- Left mono sound will send output signals
to Left speaker and Right mono sound will send output
signals to Right speaker.
L-Mono --- Left mono sound will send output signals to
Left speaker and Right speaker.
R-Mono --- Right mono sound will send output signals
to Left speaker and Right speaker.
Reverb Mode
Reverb mode provides a virtual surround sound expe-
rience using just two speakers.
HDCD
Set the audio output cutoff frequency point when play-
ing an HDCD disc.
Night Mode
In this mode, the high volume outputs are softened
and low volume outputs are brought upward to an au-
dible level. It is useful for watching your favourite action
movie without disturbing others at night.
Component
Sets the video output according to your video connection.
This setting is not required if you are using the VIDEO
OUTPUT jack (yellow) to connect the DVD micro sys-
tem to your TV.
S-Video --- Select this if you have connected the DVD
micro system to your TV using S-Video jack.
Pr/Cr Pb/Cb Y --- Select this if you have connected the
DVD micro system to your TV using Component video
jacks.
RGB --- Select this for SCART connection.
TV MODE
Selects Progressive or interlace video output mode
when Pr/Cr Pb/Cb Y is selected.
In the progressive scan mode, you can enjoy the high
quality picture with less flickers. It only works when you
have connected the DVD player's Y Pb Pr jacks to your
TV that supports the progressive video input. Otherwise,
a distorted picture will appear on the TV.
Quality
This menu helps you to set the video quality.
Sharpness
Adjusts the sharpness level.
High, Medium and Low.
Brightness
Adjusts the brightness level.
Range: -20-+20.
- 13 -