Connect To The Amplifier With Digital Signal Input Terminal; Connecting The Ac Power Cord - VIETA VMD500 Owner's Manual

Connect to the amplifier with digital signal input terminal

Terminal board for the DVD player
With digital signal input terminal's Dolby
Digital signal decode amplifier terminal board

Connecting the AC Power Cord

Terminal board for the DVD player
AC Adapter
With digital signal input terminal's
Dolby Digital signal decode amplifier
AC Cord
Use coaxial signal wire to connect coaxial output
jack of the DVD player with coaxial input jack of
other amplifier, then you can feel the super digital
sound effect.
Insert the AC adapter cord into unit, then insert one
side of AC power cord into AC adapter and other
side into a wall outlet, and your system is at your
command!
Caution:
Be sure to unplug the power cord from the outlet
when going away or when the system is not
in use for an extended period of time.
- 5 -