Listening To Radio Broadcasts - VIETA VMD500 Owner's Manual

Listening to Radio Broadcasts

Caution: Before listening to the radio, please check if FM antennas are correctly connected.
Press tuner function button (
(You can also operate the key "
Press the tuning forward button (
l
until you find the station you want.
Press and hold the tuning forward button (
l
will change up automatically until the next station is found.
(You can also operate the key "
Press the tuning backward button (
l
until you find the station you want.
Press and hold the tuning backward button (
l
will change down automatically until the next station is found.
(You can also operate the key "
You can store the well tuned station by pressing the memory button (
preset up to 16 FM stations.)
Tune in the desired station, then press the memory button (
l
Use the
l
number. (You can also operate the key "
Press the memory button (
l
to the broadcast frequency display.
Note: If the system is unplugged or if a power failure occurs, the preset stations will
remain stored in the memory.
Press the channel select forward button (
l
after presetting station. Its band and frequency are displayed on the VFD.
Press the channel select forward button (
when in store the station.
Press the channel select backward button (
l
before presetting station. Its band and frequency are displayed on the VFD.
Press the channel select backward button (
number when in store the station.
(You can also operate the key "
Press the stereo/mono select button (
receive the FM radio mode, it can get the best effect.
TUNER
FUNCTION
button or button on the remote control once by once to select the preset
H G
PROGRAM
G
) to select TUNER function.
" on the panel of unit.)
) repeatedly to move from frequency to frequency
C
) for one second or more, the frequency
C
" on the panel of unit.)
BF
) repeatedly to move from frequency to frequency
D
) for one second or more, the frequency
D
" on the panel of unit.)
L
, " on the panel of unit.)
G H
) to store the station. After 1 second, the VFD returns
) once by once to select preset number
G
) once by once to select the preset number
G
) once by once to select preset number
H
) once by once to select the preset
H
, " on the panel of unit.)
H
) to select the Stereo or MONO channel to
MODE
- 16 -
). (You can
PROGRAM
).
PROGRAM