Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Siemens Gigaset S810A User Manual

Setting pauses

Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key c
and sending the number.
v
Open the main menu.
*#Q5# L
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 3 secs.;
3 = 7 secs.) and press
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5# 2
Press keys.
~
Enter a number for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause (pause
after access code)
Prerequisite: You have saved an access code
¢
( page 78).
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause (1 = 1 sec.; 2 = 2 secs.;
3 = 3 secs.; 4 = 6 secs.) and
§OK§
press
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
§OK§
.
§OK§
.
.
Connecting the base to the PABX
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite: You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automat-
ically activated again.
79