Siemens Gigaset S810A User Manual page 70

Using Bluetooth devices
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be no
more than 10 m.
Please note
u
If you register a headset, any headset
that is already registered will be over-
written.
u
If you would like to use a headset with
your handset that is already regis-
tered to another device (e.g. to a
mobile phone), please deactivate
this connection before you start the
registration process.
ò
¢ ¢
v
Search for Headset / Search
Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
§Options§
Press the display key.
Trust Device
Select and press
~
Enter the PIN for the Bluetooth
device you want to register and
§OK§
press
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
§Cancel§
Press the display key.
Repeat search if necessary:
§Options§
Press the display key.
Repeat Search
Select and press
68
§OK§
.
.
§OK§
.
Editing the list of known (trusted)
devices
Open list
ò
¢ ¢
v
Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data devices
If a device is connected, the corresponding
ò
symbol is shown in the header of the dis-
play.
Viewing entries
¢
s (select entry)
Open list
§View§
Press the display key.
Device name and address are
displayed.
Back with
Deregistering Bluetooth devices
¢
s (select entry)
Open list
§Options§
Press the display key.
Delete Entry
Select and press
Please note
If you deregister an activated Bluetooth
device, it may try to reconnect as an
"unregistered device".
Changing the name of a Bluetooth
device
¢
s (select entry)
Open list
§Options§
Press the display key.
Edit Name Select and press
~
Change the name.
§Save§
Press the display key.
§OK§
.
§OK§
.
§OK§
.